D-Link DAP-X1860: OpenWrt Compatibility Report
The D-Link DAP-X1860 runs OpenWrt 24.10.5 on the ramips/mt7621 target, and has been supported since 22.03.4. Its WiFi 6 (AX) wireless on the mt76 driver rates good for open-source driver support (0.80/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the D-Link DAP-X1860, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7621 |
|---|---|
| CPU | 2 cores @ 880 MHz |
| RAM | 256 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 1 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7975AN, MediaTek MT7915DAN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7621 |
| Package architecture | mipsel_24kc |
| Current release | 24.10.5 |
| Supported since | 22.03.4 |
| Install method | D-Link Recovery GUI |
| Install difficulty | easy |
| Power supply | 12 VDC, 2.0A via barrel |
| Device type | Repeater |
| Estimated throughput | 220 Mbps |
| Availability | discontinued |
Installing OpenWrt on the DAP-X1860
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: D-Link Recovery GUI.
http://192.168.0.50/, use chrome/ edge
Official OpenWrt device page for the DAP-X1860
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.