Cudy X6: OpenWrt Compatibility Report
The Cudy X6 runs OpenWrt 25.12.2 on the ramips/mt7621 target, and has been supported since 22.03.6. Its WiFi 6 (AX) wireless on the mt76 driver rates good for open-source driver support (0.80/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Cudy X6, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7621AT |
|---|---|
| CPU | 2 cores @ 880 MHz |
| RAM | 256 MB |
| Flash | 16 MB |
| Ethernet ports | 5 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7905DAN, MediaTek MT7975DN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7621 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 22.03.6 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.5A via barrel |
| Device type | Home router |
| Estimated throughput | 220 Mbps |
| Availability | discontinued |
Installing OpenWrt on the X6
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image. See Device Page for more info.
Official OpenWrt device page for the X6
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Hardware versions
The X6 ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.
| Version | Target | Current release | WLAN hardware |
|---|---|---|---|
| V2 shown above | ramips/mt7621 | 25.12.2 | MediaTek MT7905DAN, MediaTek MT7975DN |
| Base version | ramips/mt7621 | 25.12.2 | MediaTek MT7915E |
Still sold and well supported
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.