Cudy RE3000: OpenWrt Compatibility Report
The Cudy RE3000 runs OpenWrt 25.12.5 on the mediatek/filogic target, and has been supported since 23.05.3. Its WiFi 6 (AX) wireless on the mt76 driver rates excellent for open-source driver support (0.95/1.0), installation is rated moderate, and it is still sold new.
Drivers: Excellent (0.95)
WiFi 6 (AX) Install: moderate
Hardware data and retail listings last checked .
Where to buy
Some links are affiliate links. Learn more.
Specifications
| SoC | MediaTek MT7981BA |
|---|---|
| CPU | 2 cores @ 1300 MHz |
| RAM | 256 MB |
| Flash | 16 MB |
| Ethernet ports | 1 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7981BA, MediaTek MT7976CN |
| WLAN driver | mt76 |
| OpenWrt target | mediatek / filogic |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.5 |
| Supported since | 23.05.3 |
| Install method | see git-commit |
| Install difficulty | moderate |
| Power supply | 100-240 VAC, 50/60Hz, 0.3A |
| Device type | Home router |
| Estimated throughput | 650 Mbps |
| Availability | available |
Installing OpenWrt on the RE3000
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see git-commit.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Sinovoip Banana Pi BPi-R3 Mini
WiFi 6 (AX) Drivers: Excellent $109
Huasifei WH3000
WiFi 6 (AX) Drivers: Excellent
GL.iNet GL-MT6000 (Flint 2)
WiFi 6 (AX) Drivers: Excellent $170
Not sure which fits? Take the 60-second quiz.