Cudy LT400E: OpenWrt Compatibility Report
The Cudy LT400E runs OpenWrt from snapshot builds only on the ramips/mt76x8 target, so there is no stable release for it yet. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.65/1.0), installation is rated moderate, and we have no current US retail listing for it. Parts of its wireless hardware are known to misbehave under OpenWrt.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Cudy LT400E. See current alternatives for devices we already have links for.
Not finding a listing does not mean you cannot buy one. Our retail links come from hand research rather than a live stock feed, so this device may well still be on sale somewhere we have not checked yet.
Specifications
| SoC | MediaTek MT7628AN |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 64 MB |
| Flash | 8 MB |
| Ethernet ports | 4 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7628AN |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt76x8 |
| Package architecture | mipsel_24kc |
| Current release | snapshot |
| Install method | see devicepage |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1A via barrel |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | unknown |
Installing OpenWrt on the LT400E
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image.
Official OpenWrt device page for the LT400E
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.