Cudy AP 3000 Wall: OpenWrt Compatibility Report
The Cudy AP 3000 Wall runs OpenWrt 25.12.5 on the mediatek/filogic target, and has been supported since 25.12.0. Its WiFi 6 (AX) wireless on the mt76 driver rates excellent for open-source driver support (0.95/1.0), installation is rated easy, and it is still sold new.
Hardware data and retail listings last checked .
Where to buy
Some links are affiliate links. Learn more.
Specifications
| SoC | MediaTek MT7981BA |
|---|---|
| CPU | 2 cores @ 1300 MHz |
| RAM | 256 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 5 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7981BA, MediaTek MT7976CN |
| WLAN driver | mt76 |
| OpenWrt target | mediatek / filogic |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.5 |
| Supported since | 25.12.0 |
| Install method | GUI OEM |
| Install difficulty | easy |
| Power supply | 802.3af/at PoE |
| Device type | Access point |
| Estimated throughput | 650 Mbps |
| Availability | available |
Installing OpenWrt on the AP 3000 Wall
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM.
Need a signed OpenWrt intermediary image from Cudy before installing official OpenWrt image.
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Other routers to consider
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.