Comtrend VR-3032u: OpenWrt Compatibility Report
The Comtrend VR-3032u runs OpenWrt 25.12.0 on the bmips/bcm63268 target, and has been supported since 21.02.0. Its WiFi 4 (N) wireless rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Comtrend VR-3032u, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM63168 |
|---|---|
| CPU | 2 cores @ 400 MHz |
| RAM | 64 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 4 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Broadcom BCM63168 |
| OpenWrt target | bmips / bcm63268 |
| Package architecture | mips_mips32 |
| Current release | 25.12.0 |
| Supported since | 21.02.0 |
| Install method | CFE web recovery |
| Install difficulty | easy |
| Power supply | 12 VDC, 1.0A via barrel |
| Device type | Home router |
| Estimated throughput | 100 Mbps |
| Availability | discontinued |
Installing OpenWrt on the VR-3032u
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: CFE web recovery.
Official OpenWrt device page for the VR-3032u
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.