COMFAST CF-WR800N: OpenWrt Compatibility Report
The COMFAST CF-WR800N was supported by OpenWrt from 15.05 on the ramips/mt7620 target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the mt76 driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and we have no current US retail listing for it.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the COMFAST CF-WR800N. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7620N |
|---|---|
| CPU | 1 core @ 580 MHz |
| RAM | 32 MB |
| Flash | 8 MB |
| Ethernet ports | 1 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | MediaTek MT7620N |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7620 |
| Package architecture | mipsel_24kc |
| Current release | EOL |
| Supported since | 15.05 |
| Install method | see devicepage |
| Install difficulty | moderate |
| Power supply | 100-240 VAC, 50-60Hz, 0.05A |
| Device type | Home router |
| Estimated throughput | 72 Mbps |
| Availability | available |
Installing OpenWrt on the CF-WR800N
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.
Official OpenWrt device page for the CF-WR800N
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.