CMCC RAX3000M: OpenWrt Compatibility Report
The CMCC RAX3000M runs OpenWrt 25.12.5 on the mediatek/filogic target, and has been supported since 23.05.1. Its WiFi 6 (AX) wireless on the mt76 driver rates excellent for open-source driver support (0.95/1.0), installation is rated moderate, and it is no longer sold new. Parts of its wireless hardware are known to misbehave under OpenWrt.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the CMCC RAX3000M, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7981B |
|---|---|
| CPU | 2 cores @ 1300 MHz |
| RAM | 512 MB |
| Flash | 128 MB (NAND) |
| Ethernet ports | 4 |
| WiFi generation | WiFi 6 (AX) |
| Radios | 2.4GHz: b/g/n/ax · 5GHz: a/n/ac/ax |
| WLAN hardware | MediaTek MT7976C |
| WLAN driver | mt76 |
| OpenWrt target | mediatek / filogic |
| Package architecture | aarch64_cortex-a53 |
| Current release | 25.12.5 |
| Supported since | 23.05.1 |
| Install method | see devicepage |
| Install difficulty | moderate |
| Power supply | 12V/1A barrel |
| Device type | Home router |
| Estimated throughput | 650 Mbps |
| Availability | discontinued |
Installing OpenWrt on the RAX3000M
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.
Official OpenWrt device page for the RAX3000M
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
Sinovoip Banana Pi BPi-R3 Mini
Huasifei WH3000
GL.iNet GL-MT6000 (Flint 2)
Not sure which fits? Take the 60-second quiz.