Buffalo WSR-600DHP: OpenWrt Compatibility Report
The Buffalo WSR-600DHP runs OpenWrt 25.12.2 on the ramips/mt7621 target, and has been supported since 15.05. Its WiFi 4 (N) wireless on the mt76 driver rates good for open-source driver support (0.80/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Buffalo WSR-600DHP, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | MediaTek MT7621S |
|---|---|
| CPU | 1 core @ 880 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 5 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n · 5GHz: a/n |
| WLAN hardware | Ralink RT5592EP, MediaTek MT7603E |
| WLAN driver | mt76 |
| OpenWrt target | ramips / mt7621 |
| Package architecture | mipsel_24kc |
| Current release | 25.12.2 |
| Supported since | 15.05 |
| Install difficulty | moderate |
| Power supply | 12 VDC, 1.5 A |
| Device type | Home router |
| Estimated throughput | 110 Mbps |
| Availability | discontinued |
Installing OpenWrt on the WSR-600DHP
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload.
Official OpenWrt device page for the WSR-600DHP
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.