ASUS RT-N10+: OpenWrt Compatibility Report
The ASUS RT-N10+ was supported by OpenWrt from 10.03.1 on the brcm47xx/mips74k target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the b43 driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the ASUS RT-N10+, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM5356 |
|---|---|
| CPU | 1 core @ 300 MHz |
| RAM | 16 MB |
| Flash | 4 MB |
| Ethernet ports | 5 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Broadcom BCM5356 |
| WLAN driver | b43 |
| OpenWrt target | brcm47xx / mips74k |
| Package architecture | mipsel_74kc |
| Current release | EOL |
| Supported since | 10.03.1 |
| Install difficulty | moderate |
| Power supply | 12 VDC, 0.5A via barrel |
| Device type | Home router |
| Estimated throughput | 37 Mbps |
| Availability | discontinued |
Installing OpenWrt on the RT-N10+
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload.
Official OpenWrt device page for the RT-N10+
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Hardware versions
The RT-N10+ ships in several hardware revisions with different chipsets. Match the version printed on your device label before flashing.
| Version | Target | Current release | WLAN hardware |
|---|---|---|---|
| PLUS/D1 shown above | brcm47xx/mips74k | EOL | Broadcom BCM5356 |
| PLUS/B1 | ramips/rt305x | EOL | Ralink RT3050 |
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.