ALFA Network Tube2HP: OpenWrt Compatibility Report
The ALFA Network Tube2HP was supported by OpenWrt from 17.01.0 on the ar71xx/generic target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the ath9k driver rates fair for open-source driver support (0.50/1.0), installation is rated moderate, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the ALFA Network Tube2HP, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Atheros AR9331 |
|---|---|
| CPU | 1 core @ 400 MHz |
| RAM | 64 MB |
| Flash | 16 MB |
| Ethernet ports | 1 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Atheros AR9331 |
| WLAN driver | ath9k |
| OpenWrt target | ar71xx / generic |
| Package architecture | mips_24kc |
| Current release | EOL |
| Supported since | 17.01.0 |
| Install method | see devicepage |
| Install difficulty | moderate |
| Power supply | PoE 802.3af/at |
| Device type | Access point |
| Estimated throughput | 50 Mbps |
| Availability | discontinued |
Installing OpenWrt on the Tube2HP
Installation on this device is rated moderate. Expect to use a recovery mode, TFTP or a vendor tool rather than a plain web upload. Documented methods: see devicepage.
Official OpenWrt device page for the Tube2HP
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.