Airlink101 AR670W: OpenWrt Compatibility Report
The Airlink101 AR670W was supported by OpenWrt from 15.05 on the ramips/rt288x target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the rt2800pci driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the Airlink101 AR670W, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Ralink RT2880 |
|---|---|
| CPU | 1 core @ 266 MHz |
| RAM | 32 MB |
| Flash | 4 MB |
| Ethernet ports | 5 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Ralink RT2872 |
| WLAN driver | rt2800pci |
| OpenWrt target | ramips / rt288x |
| Package architecture | mips_4kec |
| Current release | EOL |
| Supported since | 15.05 |
| Install method | U-Boot web recovery, see devicepage |
| Install difficulty | easy |
| Power supply | 5 VDC, 2.0A |
| Device type | Home router |
| Estimated throughput | 33 Mbps |
| Availability | discontinued |
Installing OpenWrt on the AR670W
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: U-Boot web recovery, see devicepage.
Official OpenWrt device page for the AR670W
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.