ADB P.DG A4001N1: OpenWrt Compatibility Report
The ADB P.DG A4001N1 was supported by OpenWrt from 15.05 on the bcm63xx/generic target, but its last supported release has reached end of life. Its WiFi 4 (N) wireless on the b43 driver rates fair for open-source driver support (0.50/1.0), installation is rated easy, and it is no longer sold new.
Hardware data and retail listings last checked .
Where to buy
We have no current retail listing for the ADB P.DG A4001N1, which is no longer sold new. See current alternatives for devices you can still buy today.
Specifications
| SoC | Broadcom BCM6328 |
|---|---|
| CPU | 1 core @ 320 MHz |
| RAM | 32 MB |
| Flash | 16 MB |
| Ethernet ports | 4 |
| USB | 1x 2.0 |
| WiFi generation | WiFi 4 (N) |
| Radios | 2.4GHz: b/g/n |
| WLAN hardware | Broadcom BCM43225 |
| WLAN driver | b43, brcmsmac |
| OpenWrt target | bcm63xx / generic |
| Package architecture | mips_mips32 |
| Current release | EOL |
| Supported since | 15.05 |
| Install method | GUI OEM, CFE web recovery, see devicepage |
| Install difficulty | easy |
| Device type | Home router |
| Estimated throughput | 40 Mbps |
| Availability | discontinued |
Installing OpenWrt on the P.DG A4001N1
Installation on this device is rated easy. You can flash it from the stock web interface without opening the case or using a serial cable. Documented methods: GUI OEM, CFE web recovery, see devicepage.
Official OpenWrt device page for the P.DG A4001N1
Flashing third-party firmware can brick a router and usually voids the warranty. Always check that the firmware image matches your exact hardware version.
Still sold and well supported
GL.iNet GL-X300B (Collie)
KuWFi CPE830(D)
YunCore CPE830(D)
Not sure which fits? Take the 60-second quiz.